Accu-Chek Performa Operator's Manual

43
Transferring Data Directly to a Computer or PDA Using
Specialised Software and Infrared Cable
Downloading data is not recommended for healthcare facilities since there is no means to
identify patient results.
1. Install the software according to the instructions. To transfer the
results to a computer, connect the infrared meter cable
according to the instructions.
2. Run the software program and follow the instructions about
how to download information. Make sure the software is ready
to accept data from the meter.
3. With the meter off, press and hold both
and until two
arrows on the display alternately ash.

Accu-Chek Performa Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Meter Dimensions	94 x 52 x 21 mm
Measurement Range	0.6-33.3 mmol/L
Memory Capacity	500 results
Battery Type	1 x CR2032 lithium coin cell
Automatic Power Off	90 seconds after last user action
Operating Humidity	10 to 90% RH
Storage Conditions	10% to 90% RH
Meter Weight	59 g (with battery)