Accu-Chek Performa Operator's Manual

44
4. Locate the infrared (IR) window on the top of the meter.
5. Locate the IR window on either the infrared cable (computer) or PDA.
6. Put the meter on a at surface. Point the two IR windows toward each other.
They should be 3–10 cm apart.
7. Do not move the infrared cable (computer), PDA, or meter during the
transfer.
8. Follow the prompts on the software.
9. The software program may shut off the meter automatically when the data
transfer is complete.
Infrared (IR) Window
Notes:
If the data did not transfer successfully, try again. Contact Roche if problems persist.•
Be sure to set the time and date in the meter for traceability of results.•

Accu-Chek Performa Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Meter Dimensions	94 x 52 x 21 mm
Measurement Range	0.6-33.3 mmol/L
Memory Capacity	500 results
Battery Type	1 x CR2032 lithium coin cell
Automatic Power Off	90 seconds after last user action
Operating Humidity	10 to 90% RH
Storage Conditions	10% to 90% RH
Meter Weight	59 g (with battery)