Accu-Chek Performa

31
Meter Set‑up
Using the Set‑up Mode
The following features can be adjusted as required.
Time and Date – set the time and date.
Beeper – select “On” or “OFF.”
Test reminder – select “On” or “OFF.” If “On” is chosen, select 1 to 4 test reminders per day.
Hypo alert – select “On” or “OFF.” If “On” is chosen, select the blood glucose level for the alert.
The
has three functions for the set‑up mode:
To enter the set‑up mode, turn on the meter then press and • hold
until “set‑up” ashes on the display.
This takes about 4 seconds.
Press and release •
to set the selected option.
To exit the set‑up mode at any time, press and • hold
for about 4 seconds until the ashing test strip
symbol appears on the display.