27
Cancel “Scroll” Standard Bolus
During programming:
• Do not press any key for 20 seconds; your insulin pump will return to RUN mode
(timeout).
OR
•
Press the Menu key and Up key at the same time to exit to the STANDARD BOLUS
screen.
OR
• Set the BOLUS AMOUNT to 0.0 units. Press the Check key to confi rm and exit
this setting.
No bolus is delivered.
During the start delay (Standard bolus symbol blinks):
• Press the Up key or Down key. Your pump will play a melody and an A8: BOLUS
CANCELLED alert is displayed. Press the Check key twice to confi rm and turn off the
alert. No bolus is delivered.
To Next Page
Loading...
