5-2 The Keypad
How to enter user codes (First Relay)
Note: First Relay user numbers are two digits
and range from 01-99.
1. Enter the installer code [1][1][1][1][*] to
enter program mode. You will hear two
beeps.
2. Enter [1] to select relay 1
3. Then enter the desired user number
(for example 02) then enter the new user
code (for example 5555) followed by
the [#] key. You will hear two beeps.
4. Continue programming for additional
user codes as desired (for example 03,
9999, #).
5. When finished, enter [*] to exit program
mode and return the Keypad normal
operation mode.
How to delete user codes (First Relay)
1. Enter the installer code [1][1][1][1][*] to
enter program mode. You will hear two
beeps.
2. Enter [1] to select relay 1
3. Then enter the desired user number (for
example 02) then the [#] key.
You will hear two beeps.
4. Continue deleting additional user codes
as desired (for example 03, #).
5. When finished, enter [*] to exit program
mode and return the Keypad normal
operation mode.
(enter programming mode)
(selects relay 1)
(selects user code 02)
(selects 5555 as the code)
(exits programming mode)
(enter programming mode)
(selects relay 1)
(selects user code 02)
(deletes user code 02)
(exits programming mode)
To Next Page
Loading...
