5-4 The Keypad
How to enter user codes (Second Relay)
Note: Second Relay user numbers are one digit
and range from 1 to 9.
1. Enter the installer code [1][1][1][1][*] to
enter program mode. You will hear two
beeps.
2. Enter [2] to select relay 2
3. Then enter the desired user number (for
example 2) then enter the new user code
(for example 5555) followed by the [#]
key. You will hear two beeps.
4. Continue programming for additional
user codes as desired (for example 03,
9999, #).
5. When finished, enter [*] to exit program
mode and return the Keypad normal
operation mode.
How to delete user codes (Second Relay)
1. Enter the installer code [1][1][1][1][*] to
enter program mode. You will hear two
beeps.
2. Enter [2] to select relay 2
3. Then enter the desired user number (for
example 2) then the [#] key.
You will hear two beeps.
4. Continue deleting additional user codes
as desired (for example 03, #).
5. When finished, enter [*] to exit program
mode and return the Keypad normal
operation mode.
(enter programming mode)
(selects relay 2)
(selects user code 2)
(selects 5555 as the code)
(exits programming mode)
(enter programming mode)
(selects relay 2)
(selects user code02)
(deletes user code 2)
(exits programming mode)
To Next Page
