Altos RAIDWatch User Guide
24
5 If the “Next” button from Figure 2–11 was selected, the
Install Active
window shown in Figure 2–
12 will appear. If you wish to stop the installation procedure, then click the “Stop” button. If you
wish to continue installing the Applet components, allow the installation shield to continue the
installation process uninterrupted.
6 Once the
Applet
components have been successfully installed, a window indicating the successful
installation, shown in Figure 2–12, will appear. To complete the process and to make the window
disappear, click on the “OK” button.
Figure 2–11 Installing Active
To Next Page
Loading...