Altos RAIDWatch User Guide
180
Explanation: Please assign one PID to each drive channel.
• Message: Channel settings failed!
Explanation: Please check the channel settings.
• Message: Drive channel can only have one ID! Please remove ID from PID list first, and then
add.
Explanation: Please remove the current ID from the PID list first, then add the new one.
B.3.2 Under Logical Drive Creation
• Message: Maximum RAID 3 or RAID 5 drive count is 31!
Explanation: You cannot create a RAID3 or RAID5 logical drive with more than 31 SCSI
drives. Reduce the number of drives you are using.
B.3.3 Under Logical Drive Settings
• Message: Delete Logical Drive failed!
What can be done: The logical drive maybe a member of a LV, so it can not be deleted.
• Message: Rebuild failed!
What can be done: Use another new drive and try to perform the rebuild again.
• Message: Expand logical drive failed!
What can be done: Replace the hard drive and rebuild the logical drive.
• Message: Add drives failed!
Adding drive is a re-initialization process. A failure during the process will be fatal.
What can be done: Delete the logical drive then recreate the logical drive.
• Message: Change LD assignment failed!
What can be done: Check if drive channel is assigned both PID and SID that own the
member SCSI drive of this LD.
B.3.4 Under RAIDView
• Message: Currently, controller supports 8 LDs.
Explanation: Currently, the controller can only support 8 logical drives.
To Next Page
Loading...