Machine Maintenance Procedures 3-17
ODD Module Installation 0
1. Install ODD bezel (A) on ODD module (Figure 3-14).
2. Install ODD bracket (D) on ODD module (Figure 3-14).
3. Secure two (2) screws (C) to secure the bracket (D) to the back of ODD (Figure 3-14).
4. Install ODD module into ODD bay. Refer to Figure 3-13.
5. Secure one (1) screw (B) to the ODD module. Refer to Figure 3-13.
6. Install HDD Module.
ID Size Quantity Screw Type
B M2.5*6 1
C M2.0*3.0 2
To Next Page
Loading...
