System Utilities 2-29
Crisis Disk Recovery 0
1. Plug in the USB flash disk.
2. Select the
Fast Format
option and click
Start
. Then click
Next
.
3. Click
Format
and then
Exit
to complete the operation.
4. Copy the
ZQS.fd
file to the USB flash disk root directory.
Do not place any other *.fd files to the USB flash disk root directory.
5. Plug in the USB Flash Disk without AC plug.
6. Press
Fn
+
Esc
keys and then plug in AC power (Don’t loose
Fn
+
Esc
keys). The power
button flashes orange.
7. Press
Power
button.
8. Loose
Power
button first but still press
Fn
+
Esc
keys and hold them down until the
power led turns off (about 1-2 seconds).
9. Press
Power
button and the system will enter crisis mode to flash the BIOS (The
process takes about 2-3 minutes).
At first running, the LED of USB flash disk will keep glitter about 3-7 minutes and restart
after. You could check the BIOS edition is right or not in this time. If correct, the crisis
system is set up ready.
To Next Page
Loading...
