Machine Maintenance Procedures 3-41
LCD Bezel Installation 0
1. Place LCD bezel on the LCD module. Refer to Figure 3-39 and Figure 3-40.
2. Press along the edges of the LCD bezel to secure the latches on the LCD module.
Refer to Figure 3-39 and Figure 3-40.
3. Install and secure two (2) screws (B) to the LCD bezel. Refer to Figure 3-38.
4. Attach and secure two (2) screw mylar (A) to the LCD bezel. Refer to Figure 3-37.
5. Install LCD module.
ID Size Quantity Screw Type
BM2.5*4 2
To Next Page
Loading...
