Acer Aspire Z1620 - Introduction

47
3. Retype password in the Confirm New Password field and press Enter.
4. If new password and confirm new password strings match, the Setup Notice dialog screen is
shown (Figure 2-6). If it is not, go to step 5.
Setup Notice
Changes have been saved.
[Continue]
Figure 2-6. Setting a Password Confirmation Notice
a. Press Enter to return to the BIOS Setup Utility Security menu.
b. The Supervisor Password parameter is shown as Set.
c. Press F10 to save changes and exit BIOS Setup Utility.
5. If new password and confirm new password strings do not match, the Setup Warning dialog is
shown. (Figure 2-7)
Setup Warning
Passwords do not match.
Re-enter password.
[Continue]
Figure 2-7. Setting a Password: Passwords Do Not Match
a. Press Enter to return to the BIOS Setup Utility Security menu.
b. The Supervisor Password parameter is shown as Clear.
c. To try to set a new password again, repeat steps 1 through 3.
Removing a Password
Perform the following:
1. Use the  and  keys to highlight Set Supervisor Password parameter and press Enter.
The Set Supervisor Password dialog box is shown. (Figure 2-8)
Set Supervisor Password
Enter Current Password
Enter New Password
Confirm New Password
[ ]
[ ]
[ ]
Figure 2-8. Removing a Password: Set Supervisor Password