48
2. Type current password in Enter Current Password field and press Enter.
3. Press Enter twice
without typing anything in Enter New Password and Confirm New
Password ields. Computer will set Supervisor Password parameter to Clear.
4. Press F10 to save changes and exit the BIOS Setup Utility.
Changing a Password
Perform the following:
1. Use the and keys to highlight Set Supervisor Password parameter and press Enter.
The Set Supervisor Password dialog is shown. (Figure 2-9)
Set Supervisor Password
Enter Current Password
Enter New Password
Confirm New Password
[ ]
[ ]
[ ]
Figure 2-9. Changing a Password: Set Supervisor Password
2. Type current password in Enter Current Password field and press Enter.
3. Type new password in Enter New Password field and press Enter.
4. Retype new password in Confirm New Password field and press Enter.
5. If new password and confirm new password strings match, The Setup Notice dialog is
shown (Figure 2-10). If it is not shown, go to step 6.
Setup Notice
Changes have been saved.
[Continue]
Figure 2-10. Changing a Password: Setup Notice
a. Press Enter to return to the BIOS Setup Utility Security menu.
b. The Supervisor Password parameter is shown as Set.
c. Press F10 to save changes and exit BIOS Setup Utility.
To Next Page
Loading...
