33
Note: Supported 3D signal timings:
3D
3D SYNC
Use this option to select the appropriate 3D function.
• DLP Link: Choose "DLP Link" to use DLP Link 3D
Glasses.
• External: Choose "External" to use VESA 3D emitter
and 3D Glasses.
3D SYNC Output
Use this option to select the appropriate 3D sync output
method.
• Normal: Choose "Normal" to output 3D sync to other
projector(s).
• Pass Through: Choose "Pass Through" to receive 3D
sync and/or pass 3D sync to another projector.
3D Format
If the 3D content is not displayed correctly, you can select a
3D format that suits the 3D content you are viewing and
obtain the best result.
3D SYNC Invert
If you see a discrete or overlapping image while wearing
DLP 3D glasses, you may need to choose "On" to get best
match of left/right image sequence to get the correct
image (for DLP 3D).
Information
• Source: Display the input source that is currently
connected to.
• Resolution: Display the resolution setting of the
current input source.
• Display Mode: Display current Display Mode.
• Laser Mode: Display current Laser Mode.
• Total Time: Display the light source hours.
• Inlet Temp: Display the temperature of the intake
vent.
• FW Version: Display the firmware version.
Signal source type Supported timing
Video/S-Video/Component
video
HQFS 3D (480i@60Hz), 576i@50Hz
VGA/HDMI (PC mode) 640 x 480@50/60/100/120Hz
800 x 600@50/60/100/120Hz
1024 x 768@50/60/100/120Hz
1280 x 800@50/60/100/120Hz (RB)
To Next Page
Loading...
