Acer H5350 - Assemble Lamp Driver Module

H5350
Condential 2-22
2-22 Assemble Lamp Driver
Module
1. Screw 4 screws to assemble Lamp
Driver Module on Lamp Driver Holder
2. Plug 2 connectors to assemble 2PIN and
5PIN cable
Note: - The 2 PIN and 5 PIN cable must be pass
through a Dent.(As the yellow square)
3. Stick a Mylar
2 PIN&5 PIN Cable
Lamp Driver Holder
Lamp Driver Module
Lamp Driver to Lamp Cable