Acer H5350 - Firmware Upgrade Procedure

H5350
Condential
5-5
5-4 Firmware Upgrade
Procedure
1. Set-up
- Hold on "Power" and plug in power cord
while holding on "Power".
- Once the Power LED light on Blue & Red
at the same time, plug in USB cable into
the projector and link to the USB port of a
PC.
Note: The system fan and the light will not
operated.
2. Execute the "DLP Compose
TM
" le.
3. Click "edit" and "perferences".
4. Click “Library.”
- Click the “browse” button and navigate to
the directory where you put the library le
in.