7 Using expansion features
Expansion sleeve
94
Attaching your Acer n20 to the expansion sleeve
1 Detach the removable battery pack from your handheld (a).
Refer to "To uninstall the battery pack" on page 9.
IMPORTANT: After removing the battery pack, you have about 30 minutes to attach the
expansion sleeve and turn the handheld back on, otherwise you risk losing all data on the
internal memory of your handheld.
2 Align the handheld’s rear panel to the expansion sleeve then, slide it in through the
sleeve’s arms (b).
3 Gently push your handheld downward until you feel it lock.
4 Slide the battery release switch on the handheld to Lock position.
3 CompactFlash Type II slot Accepts CompactFlash-based peripheral devices.
4 CompactFlash Type II slot
eject button
Press to pop-out any installed CompactFlash-based
device.
5 100-pin expansion slot Connects the expansion sleeve to your handheld.
6 USB host connector Accepts USB peripheral devices.
7 Power socket Connects to the AC adapter to provide external
power supply to the system
No. Component Usage
To Next Page
Loading...
