First things first
Taking care of your Acer n20
viii
Performing a hard reset
A hard reset will erase all records and entries stored in your handheld. Never perform
a hard reset unless a soft reset does not correct your problem. When you perform your
next ActiveSync operation, you can restore any data that you previously synchronised
to your computer. To perform a hard reset, do the following:
1 Detach the battery pack from your handheld.
Refer to "To uninstall the battery pack" on page 9 for instructions.
2 Slide up the hard reset switch located on the right side of the battery bay (a) then
slide it down again (b).
3 After resetting your handheld, reinstall the battery pack in its bay.
Refer to "To install the battery pack" on page 8 for instructions.
NOTE: When you perform a hard reset, the current date and time are retained. Formats,
preferences, and other settings are restored to their factory default settings.
To Next Page
Loading...
