Acer n20 - Connecting Directly to an Email Server; Getting Help on Connecting

9 Getting connected
Connecting directly to an email server
113
• When connected via dial-up or VPN, tap the Connection icon on your
navigation bar, and then tap End.
• When connected via a network (Ethernet) card, remove the card from your
handheld.
Connecting directly to an email server
You can set up a connection to an email server so that you can send and receive email
messages by using a modem or network connection and Inbox on your handheld.
NOTE: The ISP or network must use a POP3 or IMAP4 email server and an SMTP gateway.
You can use multiple email services to receive your messages. For each email service
you intend to use, first set up and name the email service. If you use the same service
to connect to different mailboxes, set up and name each mailbox connection.
To set up an email service
1 In Inbox on your handheld, tap Services.
2 Tap New Service.
3 Follow the directions in the New Service wizard.
For an explanation of a screen, tap and then Help. When finished connecting to
your email server, tap Services and then Connect.
For more information on using the Inbox program, see "Inbox" on page 43.
Getting help on connecting
More information on the procedures described here, as well as information on
additional procedures, can be found in the following locations:
• The section on "Inbox" on page 43.
• Online Help of your handheld. Tap and then Help. Tap View, All Installed
Help, and then Inbox or Connections.
• ActiveSync Help on the your computer. In ActiveSync, click Microsoft
ActiveSync Help on the Help menu.
• For troubleshooting information, see the Pocket PC Web site at
(http://www.microsoft.com/mobile/pocketpc/).