1 Getting started
Preparing to use your Acer n20
11
Charging your Acer n20
For initial use, you need to charge your handheld for three hours. After that, you can
charge it for a few minutes each day to recharge the battery to full capacity. Normally,
you can use your handheld for eight straight hours of operation before you need to
recharge the battery.
To charge your Acer n20
You use the cradle to charge your handheld.
Connect the AC adapter connector to the power socket at the back of the cradle, then
plug the other end of the AC adapter into any AC current outlet.
Insert your handheld into the cradle. The bottom edge of your handheld should align
smoothly with the cradle when it is inserted properly.
To Next Page
Loading...
