Acer n20 - Setting up Your Acer N20

1 Getting started
Preparing to use your Acer n20
12
LED status during charging:
• Charging: Flashing green
• Charging complete: Steady green
If the battery level becomes low in the course of normal use, a status icon appears on
the handheld screen indicating low or very low battery status (refer to "Status icons"
on page 15). Perform an ActiveSync operation to back up your data, then recharge the
battery.
If your handheld shuts down (i.e., battery is completely drained out) you have about
30 minutes to recharge the battery before you lose all data on your handheld’s
internal memory.
The battery pack is removable. Refer to the succeeding section for instructions on how
to remove it from the battery bay.
NOTE: You have the option to purchase a spare battery pack for your handheld.
Setting up your Acer n20
After you have initially charged your handheld for three hours, you can now set it up
for use. Refer to the instructions below.
To set up your Acer n20
1 Turn on your handheld by pressing the power button on the front panel.
2 Follow the onscreen instructions to set up your handheld.