ⅰ
Mission
®
Cholesterol Monitoring System
Important Safety Instructions
If the meter is powered by AC adapter, unplug the equipment
immediately after use.
Misuse of electrical equipment can cause electrocution, burns,
fire and other hazards.
Do not place the equipment in liquid, nor put it where it could fall
into liquid. If the equipment becomes wet, unplug it before
touching it.
If the meter is powered by AC adapter, do not leave the equipment
unattended while it is plugged in.
Use the equipment only for the purpose described in the
instructions for use.
Do not use accessories which are not supplied or recommended
by the manufacturer.
Do not use the equipment if it is not working properly or if it has
suffered any damage.
Do not let the equipment or its flexible cord come into contact
with surfaces which are too hot to touch.
Do not use the equipment where aerosol sprays are being used or
where oxygen is being administered.
Do not use the equipment in direct sun.
Keep these instructions.
To Next Page
Loading...
Need help?
General
