1
Section 1 Introduction
The Mission
®
Cholesterol Monitoring System is intended for the quantitative
determination of Total Cholesterol (CHOL), High-Density Lipoprotein
Cholesterol (HDL), Triglycerides (TRIG), calculated Low-Density Lipoprotein
Cholesterol (LDL), and the calculated ratio of CHOL/HDL in capillary and
venous human whole blood, plasma, and serum. Professionals can also
evaluate a patient’s 10-year risk of Coronary Heart Disease with this system.
The easy-to-operate system consists of a portable meter that analyzes the
intensity and color of light reflected from the reagent area of a test device,
ensuring quick and accurate results.
The Mission
®
Cholesterol Monitoring System provides results in less than 2
minutes. The meter can store up to 200 results and records can be
transferred to a computer for further analysis using the USB port. The meter
can be operated with 4 AAA (1.5V) batteries or an optional AC adapter.
To ensure accurate results:
Read instructions carefully and complete any necessary training before
use.
Use the code chip that is included in each box of test devices.
Only use the Mission
®
Cholesterol Test Devices with the Mission
®
Cholesterol Meter.
For in vitro diagnostic use only. Your blood cholesterol monitoring
system is only to be used outside the body for testing purposes.
For self-testing and professional use.
For professional use: Fresh capillary blood, heparinized or EDTA
venous whole blood, serum and heparinized plasma can be tested. For
self-testing use: Only test fresh capillary blood from the fingertip.
For self-testing, consult your physician or healthcare professional
before making any adjustments to your medication, diet or activity
routines.
Keep out of reach of children.
Note: Throughout this User’s Manual, meter parts or functions will
appear in bold. Items appearing on displays are identified in
bold italics.
To Next Page
Loading...
Need help?
General
