49
Section 12 Precautions
Follow the precautions listed below to ensure accurate results and proper
operation of the meter.
The protection provided by the equipment may be impaired if used in a
manner not defined in this instruction manual.
Wear gloves to avoid contact with potentially hazardous biological
specimens during testing.
Avoid storing or operating the meter in direct sunlight, excessive
temperatures, or high humidity. Refer to Appendix 1 Meter
Specifications for operating condition requirements.
Keep the unit clean. Wipe it frequently with a soft, clean, and dry
cloth. Use a damp cloth when needed.
Do not clean the unit with substances, such as gasoline, paint thinner
or other organic solvents to avoid any damage to the meter.
Do not clean the LCD or sensor area with water. Lightly wipe with a
soft, clean, dry cloth.
The device channel must be kept clean. Lightly wipe with a soft,
clean, dry cloth each day. Use a damp cloth as needed. Refer to the
Maintenance section.
Follow all local regulations when discarding the unit or its accessories.
Do not use the unit or the devices outside of the operating temperature
ranges: 15-40°C (59-104°F); ≤ 90％ RH.
To Next Page
Loading...
Need help?
General
