6
HOW TO HANDLE THE LCD PANEL
• Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.
• If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may
cause skin inammation If the liquid gets in your mouth, immediately gargle and consult with your doctor.
Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least
15 minutes or longer in clean water.
Possible Adverse Eects on LCD Panel:
If a ed (non-moving) pattern remains on the LCD Panel for long periods of time, the image can become
permanently engrained in the LCD Panel and cause subtle but permanent ghost images. This type of damage
is NOT COVERED BY YOUR WARRANTY. Never leave your LCD Panel on for long periods of time while it is
displaying the following formats or images:
• Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.
• Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on
a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a
widescreen (16:9) display (black bars on left and right sides of screen).The following symptoms are not
signs of malfunction but technical limitation. Therefore we disclaim any responsibility for these symptoms.
The following symptoms are not signs of malfunction but technical limitati on. Therefore we disclaim
any responsibility for these symptoms.
• LCD Panels are manufactured using an extremely high level of precision technology, however sometimes
parts of the screen may be missing picture elements or have luminous spots.
• Do not install the LCD Panel near electronic equipment that produces electromagnetic waves. Some
equipment placed too near this unit may cause interference.
• Eect on infrared devices – There may be interference while using infrared devices such as infrared
cordless headphones.
1
Important Safety Information
To Next Page
Loading...
