12
Inserting Remote Control Batteries
1. Remove the battery cover by pulling then lifting the knob on the cover.
2. Insert the batteries, corresponding to the (+) and (-) marking on the battery compartment.
3. Reattach the battery cover.
CAUTION
• Only use the specied AAA batteries.
• Do not mix new and old batteries. This may result in creaking or leakage, which may pose a risk
of re or lead to personal injury.
• Insert batteries according to (+) and (-) marking. Inserting the batteries incorrectly may result in
leakage, which may pose a risk of re or lead to per sonal injury.
• Dispose of the battery in accordance with local laws and regulations.
• Keep the batteries away from children or pets.
• When the remote control will not be used for an extended period, remove the batteries.
Operating the Remote Control
1. Aim remote control directly at the remote
control sensor on the down of the TV set.
2. Remote control range is at approx.16 feets
with angles of approx. 30 degree.
3. Avoid obstructions between the remote
control and the sensor.
• If you do not intent to use the remote control
for a long time, remove the batteries.
• If the remote control does not operate
correctly, or if the operating rage reduced,
replace both batteries with new ones.
IR Receiver
30
6
Using the Remote Control