1-111-11
1-111-11
1-11
Bhapter 1 BIOS SettpBhapter 1 BIOS Settp
Bhapter 1 BIOS SettpBhapter 1 BIOS Settp
Bhapter 1 BIOS Settp
Hot Key Power On First you must choose the
Ctrl-F1 Power On by Hot Key function
Ctrl-F2 then Enter from 1 to 8
Ctrl-F3 characters to set the Hot Key
Ctrl-F4 Power On your system.
Ctrl-F5
Ctrl-F6
Ctrl-F7
Ctrl-F8
Onboard FDC Controller
Enabled (default) Enabled onboard FDC
Controller.
Disabled Disabled onboard FDC
Controller.
Onboard Serial Port1/Port2
Select an address and corresponding interrupt for the first
and second serial ports.
The Choices: Disabled, Auto, (3F8/IRQ4), (2F8/IRQ3),
(3E8/IRQ4), (2E8/IRQ3).
UART Mode Select
This item allows you to select which Infra Red(IR)
function of the onboard I/O chip you wish to use.
The Choices: Normal(default), IrDA, SCR, ASKIR.
UR2 Duplex Mode
This item allows you to select the Infra Red(IR) function
of the onboard I/O chip you wish to use.
The Choices: Half (default), Full.
To Next Page
Loading...
