Acorp 6A815E1 - 2.6 Power Management Setup

1-121-12
1-121-12
1-12
Bhapter 1 BIOS SettpBhapter 1 BIOS Settp
Bhapter 1 BIOS SettpBhapter 1 BIOS Settp
Bhapter 1 BIOS Settp
ACPI Function Enabled Item Help
ACPI Suspend Type S1(POS)
Power Management User Define Menu Level
Video Off Method DPMS
Video Off In Suspend Yes
Suspend Type Stop Grant
Modem Use IRQ 3
Suspend Mode Disabled
HDD Power Down Disabled
Soft-Off by PWR-BTN Instant-Off
Wake Up by PCI Card Disabled
Power On by Ring Enabled
USB KB Wake-Up From S3 Disabled
PWRON After PWR-Fail Off
CPU Thermal-Throttling 50.0%
Resume by Alarm Disabled
Data (of Month) Alarm 0
Time (of hh:mm:ss) Alarm 0 0 0
**Reload Global Timer Events **
Primary IDE 0 Disabled
Primary IDE 1 Disabled
Secondary IDE 0 Disabled
Secondary IDE 1 Disabled
FDD,COM,LPT Port Disabled
PCI PIRQ[A-D]# Disabled
←→↑↓: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F1:General Help F5:Previous Values F6:Fail-Safe Defaults
F7:Optimized Defaults
ACPI Function
This item display status of the Advanced Configuration and
Power Management (ACPI).
ACPI Suspend Type
The item allows you to select the suspend type under ACPI
operating system.
S1(POS) (default) Power on Suspend.
S3(STR) Suspend to RAM.
The Power Management Setup allows you to configure your
system to most effectively save energy while operating in a
manner consistent with your own style of computer use.
◎◎
◎◎
◎ Figure 6. Power Management Setup
CMOS Setup Utility-Copyright (C) 1984-2001 Award Software
Power Management Setup
2.6 2.6
2.6 2.6
2.6
Power Management SetupPower Management Setup
Power Management SetupPower Management Setup
Power Management Setup