1-31-3
1-31-3
1-3
Chaosdr 1 Mnshdranarc CdrbrhoshnnChaosdr 1 Mnshdranarc Cdrbrhoshnn
Chaosdr 1 Mnshdranarc CdrbrhoshnnChaosdr 1 Mnshdranarc Cdrbrhoshnn
Chaosdr 1 Mnshdranarc Cdrbrhoshnn
On-Board IDE
-An IDE controller on the ICH2 chipset provides IDE
HDD/CD-ROM with PIO, Bus Master and Ultra DMA
33/66/100 operation modes.
-Can connect up to four IDE devices.
On-Board Peripherals
-1 floppy port supports 2 FDD with 360K,720K,1.2M,
1.44M and 2.88M byte.
-2 serial ports (COM1+COM2(10 pin) ).
-4 USB ports.
-1 VGA port.(Only support by 6A815E1 M/B)
-1 parallel port supports SPP/EPP/ECP mode.
Audio
-ICH2 chip integrated.
-AC’97 CODEC on board .
BIOS
-The mainboard BIOS provides “Plug & Play” BIOS
which detects the peripheral devices and expansion
cards of the board automatically.
-The mainboard provides a Desktop Management
Interface (DMI) function which records your
mainboard specifications.
-BIOS support CD-ROM, SCSI, LAN BOOT,
Temperature sensor, Wake on modem, Alarm Bus
CLK setup with BIOS.
Hardware Monitor Function
-CPU Fan Speed Monitor.
-System and CPU Temperature Monitor.
-System Voltage Monitor.
1.3 Features1.3 Features
1.3 Features1.3 Features
1.3 Features
To Next Page
