EasyManua.ls Logo

ACP ARX1 - Page 49

ACP ARX1
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
©2018 ACP, Inc.
Cedar Rapids, IA 52404 Page 49 of 80
Part No. 16400033
Original Instructions
Rear Exhaust Duct
The Rear Exhaust Duct directs exhaust air from the Cooling Fans out of the rear of the oven.
Removal and Replacement
1. Disconnect oven from Power Supply.
2. Remove Top, Right, Left and Rear Panels.
(see Panel Removal)
3. Because of proximity to HV circuit, discharge all HV
Capacitors.
4. Using a 1/4” Hex Socket, remove two (2) Screws from
each side where the duct connects to the Magnetrons.
5. From the rear, remove the two (2) Screws connecting the
Duct to the Antenna Chamber Duct.
6. Disconnect Wires running through Grommet, making a
note of where they connect.
7. Lift out.
8. Replace by reversing these steps.
Rear Exhaust Duct Removal
Right Side Left Side

Table of Contents

Related product manuals