Acteon MINILED SUPERCHARGED - Default Chapter; Table of Contents

Contents
1 Documentation
3
1.1 Associated documentation
3
1.2 Electronic documentation
3
2 Required information
5
2.1 Indication for use
5
2.2 Operating principle
5
2.3 Using accessories not supplied by the manufacturer
5
2.4 Connecting and disconnecting accessories during use
5
2.5 Repairing or modifying the medical device
5
2.6 Warranty
5
2.7 Latest document update
5
2.8 Date of first CE marking
5
3 Unpacking the medical device
7
3.1 Precautions for use
7
4 Installing the medical device
9
4.1 Fixing the medical device to a non-removable support
9
5 Connect the medical device
11
5.1 Connecting the medical device to the electrical network
11
5.2 Mains adapter
11
5.3 Charge the battery
11
6 Dispensing a treatment
13
6.1 Accessory usage conditions
13
6.2 Preparation for use
13
6.3 Connect the accessories.
14
6.4 Using the medical device
14
6.4.1 Switching on the medical device
14
6.4.2 Configuring the medical device
14
6.4.2.1 Selection of the mode
14
6.4.2.2 Selecting the exposure time
14
6.4.3 Performing a cure cycle
15
6.5 Switching off the medical device
15
6.6 Disconnecting the medical device
15
7 Medical device description
17
7.1 Screen of the medical device
17
7.2 Light indicator
17
7.3 MINILED SUPERCHARGED
17
7.4 Base
17
7.5 Operating mode
17
7.6 Buttons
18
7.7 Wave peak
18
7.8 Waveform with micro-flash
18
7.9 Mains adapter
18
8 Disinfection and sterilising
19
8.1 Clean and disinfect the medical device
19
8.2 Cleaning, disinfecting and sterilising accessories
19
9 Monitoring and routine maintenance
21
9.1 Check the power
21
10 Identifying incorrect operation
23
10.1 Not working
23
10.2 Charging base not working
23
10.3 Optical Guide
23