SPM-32A ... SPM-36A 4.2 Operation and features
4-65
Calling up several setups
To recall a sequence of stored setups, you do not need to
reselect the RCL MEM function each time.
Example: Recall three setups; starting at address is 12. The
first address is entered using the number keys. This can then
be modified using [↑] (increment = 1).
1st setup
2nd setup:
3rd setup:
Quitting memory mode
*
2 5 ENTER
RCL MEM
ENTER
(the address is increased by 1 to 13)
ENTER (the address is increased by 1 to 14)
*
MEM OFF
To Next Page
Loading...
