4-66
4.2 Operation and features SPM-32A ... SPM-36A
Updating stored results
Stored results and setups can be updated by recalling the
setup and storing it at the same address after a
measurement has been made. The setup itself is
unchanged. The new results can be viewed later using
DISPLAY MEM.
Example: Updating results, starting at address 25:
• Recall setup at address 25:
• Make measurement and then re-store:
• Increment address by 1 and recall setup:
• and so on.
*
2 5 ENTER
RCL MEM
*
ENTER
STO MEM
*
ENTER or
RCL MEM
ENTER
RCL MEM
*
To Next Page
Loading...
