Website Blocking
Website blocking is used to prevent all devices on the Gateway’s network from
accessing particular web sites on the Internet. To set up web site blocking on the
Gateway’s network:
1. Click Website Blocking from the menu on the left side of any Advanced Setup
screen. The Website Blocking screen appears.
2. Enter the web site address of the web site to be blocked in the Website Address
text box.
3. Click Apply to save your changes.
4. Repeat steps 1-3 to block other web sites from being acesssed on the
Gateway’s network.
The web sites blocked from being accessed on the Gateway’s network are listed at
the bottom of the screen.
To Next Page
Loading...
Need help?
General
