5. Click Add to create a schedule access.
6. Repeat steps 1-5 to create multiple access schedules for other devices on the
Gateway’s network.
The devices that are configured with an access schedule are listed at the bottom of
the screen.
DSL Bonding Settings (T2200H only)
DSL bonding allows devices the Gateway to use one or both of its DSL lines in
bonded mode. When bonding is disabled, the Gateway only uses a single DSL line.
To configure DSL bonding, click on DSL Bonding Settings in any Advanced screen.
The DSL Bonding Settings screen will appear. There are three options for DSL bond-
ing: Auto, Single, and Bonding. Click in the appropriate button to activate.
To Next Page
Loading...
Need help?
General
