Scheduling Access
Scheduling access is used to allow a device on the Gateway’s network to access
the Internet at certain times of the day, or certain days of the week, only. During
times not configured in the Scheduling Access screen, the device will not be able to
access the Internet. To set up scheduling access on a networked device:
1. Click Scheduling Access from the menu on the left side of any Advanced
Setup screen. The Scheduling Access screen appears.
2. Select the device on which you want to scheduled Internet access from the
Select Device drop-down list, or enter the device’s MAC address in the Enter
MAC Address text box.
3. Select the days of the week during which you want to allow Internet access by
clicking in the appropriate check box below “Select the days of the week…”.
4. If applicable, set the time range during which you want to allow Internet access.
This time range will apply only to the days you activated in step 3.
To Next Page
Loading...
Need help?
General
