155
Audio
Playing FM/AM Radio
Selecting FM/AM Mode
1. Press the MENU button. (in AUDIO mode)
2. Rotate i to select Change Source. Press u.
3. Rotate i to select the frequency band (FM, AM). Press u.
X
The band and frequency are displayed on the audio/information screen.
1. Select Audio Source.
2. Select the frequency band (AM, FM) icon.
X
The band and frequency are displayed on the On Demand Multi-Use Display
TM
.
Audio Screen Control
Control the audio system through the audio/information screen and On Demand
Multi-Use Display
TM
.
Rotate i to select a preset station.
Press u.
X
Press and hold u for a few
seconds to store the current
station.
X
Press MENU button to display the
menu items.
2 Audio Menu P. 157
1 Playing FM/AM Radio
You can control the AM/FM radio using voice
commands.
2 Voice Control Operation P. 6
The ST indicator appears on the display
indicating stereo FM broadcasts.
Stereo reproduction in AM is not available.
Interface Dial
On Demand Multi-Use Display
TM
The radio can receive the complete AM and FM
bands:
AM band: 530 to 1710 kHz
FM band: 87.7 to 107.9 MHz
You can store 6 AM stations and 12 FM stations
into the preset memory.
Preset stations
Frequency band
Interface Dial
Continued
MDX_KA-31TZ58210.book 155 ページ ２０１５年８月３１日 月曜日 午後１時４８分
To Next Page
Loading...
