305
XX
Error Messages
X
CD Player
Troubleshooting
CD Player
If a disc error occurs, you may see the following error messages.
Error Message Cause Solution
Unplayable File
Track/file format not supported
• Current track/file will be skipped. The next supported track/file
plays automatically.
Bad Disc
Please Check Owner’s Manual
Push Eject
Mechanical error
• Press the (eject) button and remove the disc, and check that the
error message is cleared.
• Check that the disc is not damaged or deformed, and insert the
disc again.
2 Protecting CDs P. 172
• If the error message reappears, press the button, and pull out
the disc.
• Insert a different disc.
If the new disc plays, there is a problem with the first disc.
• If the error message repeats, or the disc cannot be removed,
contact a dealer.
Do not try to force the disc out of the player.
Mecha Error
Bad Disc
Please Check Owner’s Manual
Servo error
Check Disc
Disc error
• Check that the disc is not damaged or deformed.
2 Protecting CDs P. 172
Heat Error
High temperature
• Turn the audio system off and allow the player to cool down until
the error message is cleared.
Troubleshooting.fm 305 ページ ２０１４年１２月１８日 木曜日 午後３時１５分
To Next Page
Loading...
Need help?
General
