Acura 2016 MDX - Avoided Area

62
XX Routing X Avoided Area
System Setup
Avoided Area
H SETTINGS button X Navi Settings X Routing X Avoided Area
Specify up to five areas to avoid (e.g., road construction, closures), if possible, when
the system calculates routes to your destination.
1. Move r and rotate i to select
New Area, or rotate i to select
an existing area to edit.
2. Rotate i to select Name to label
the area to avoid. Press u.
3. Enter a name or title. Move r to
select OK.
4. Rotate i to select Area to define
the area to avoid. Press u.
The following options are available (after an area is set):
• View Area: Displays the selected avoid area on the map.
• Delete: Deletes the selected avoid area.
1 Avoided Area
The maximum size of an “avoid area” is
approximately 1/2 mile.
If your selected area contains a freeway, you are
asked “Do you want to avoid freeways?”
Answering “No” allows you to use a route
through an avoid area on a freeway without any
pop-up messages.
You can select areas to avoid, however you
cannot select roads or areas that you want the
system to use for routing.
You can enter up to 25 characters for the name.
MDX_KA-31TZ58210.book 62 ページ ２０１５年８月３１日 月曜日 午後１時４８分