76
XX
Map
X
Color
System Setup
Set the screen brightness separately for Day and Night modes. Press the
a
(Display mode) button to cycle through the display modes (Day to Night to Off).
1. Press the a button.
X
The Brightness bar is displayed
for a few seconds.
X
Rotate i to adjust the
brightness. Press u.
2. Press the a button again.
X
Repeat the procedure to switch
the display modes.
■ Switching Display Mode Manually
1 Switching Display Mode Manually
A visual guide helps you see the difference
between Day and Night modes.
2 Day or Night Mode P. 10
MDX_KA-31TZ58210.book 76 ページ ２０１５年８月３１日 月曜日 午後１時４８分
To Next Page
Loading...
