- 58 -
AC-3 Status Feedback (cont.)
Step 24 Press the VOL UP button and the display will read "NO PROD INF2", which means
that product information does not exist. If the display reads "PROD INFO 1" infers
that product information does exist for dual mono operation.
Step 25 Press the VOL UP button and the display will read "RM TY2 = N/IND" (room type
not indicated), "RM TY2 = LARGE" (room type is large), or "RM TYP = SMALL"
(room type is small). These indicate the size of the room the audio was mixed for
dual mono operation.
Step 26 Press the VOL UP button and the display will read "ML2 = ###", which indicates the
mix level for channel two in dual mono operation.
Step 27 Press the VOL UP button and the display will read "NO PROD INF1", which means
that product information does not exist. If the display reads "PROD INFO 1" infers
that product information does exist.
Step 28 Press the VOL UP button and the display will read "RM TYP = N/IND" (room type
not indicated), "RM TYP = LARGE" (room type is large), or "RM TYP = SMALL"
(room type is small). These indicate the size of the room the audio was mixed for.
Step 29 Press the VOL UP button and the display will read "ML = ###", which indicates the
mix level for normal operation.
To Next Page
Loading...
