42
| P a g e © Adam Equipment Company 2010
• Press [Func] to view the options for setting.
• Press [Tare] to confirm the change and then advance to the next parameter
by pressing the [Func] key.
This group of parameters-
- enables or disables the percent weighing
- sets the lock for re-setting the check weighing limits
- enables or disables the check weighing LED indicator
- enables or disables the check weighing alarm
- sets the User Password for check weighing
enables or disables the negative check weighing
Parameter Description Options
Default
setting
F1 LLk
This parameter prevents the
normal user from changing
the limits with the help of a
Limit Lock.
With LLK set to Off (oFF),
the user is allowed to
change limits at any
time.
With LLK set to Preset
(PSt), the user is allowed
to use one of the preset
limits only.
oFF
To Next Page
Loading...
Need help?
General
