Page 22
Rev. : 002
HF - VISION 10 & PHOENIX
Lighting Technologies
6.4. Display Key History List
In both, direct and command line mode, the corresponding button function abbreviation
(1 to 4 alphanumeric digits) is displayed directly i.e. on-line in the bottom right corner of
the display. When the next functional button is pushed, the former button function
abbreviation displayed in the bottom right corner shifts to the left (leaving one space
character in between) and the new button function abbreviation is displayed instead.
Example: setting channel number 123 at 72% intensity
Key sequence: 1 2 3 AT 7 . 2
Standard Display :
10:15
1 2 3 AT 7 . 2
When the line is full, the upper lines are used:
Key sequence: 1 2 3 AT 7 . 2 CL CL MEM 1 ↑ CL CL MEM 2 ↑ CL
Standard Display :
10:15
1 2 3 AT 7 .
2 CL CL MEM 1 ↑
CL CL MEM 2 ↑ CL
If all lines are filled, the 'oldest' key abbreviation disappears in the left top corner
Key sequence:
1 2 3 AT 7 . 2 CL CL MEM 1 ↑ CL CL MEM 2 ↑ CL CL MEM 3 ↑ CL CL
Standard Display :
10:15
3 AT 7 . 2 CL CL
MEM 1 LOAD CL CL
MEM 2 LOAD CL CL
MEM 3 LOAD CL CL
To Next Page
Loading...
Need help?
General
