ADB PHOENIX - 9.5. SCC Configuration Settings; 9.5.1. Communication Configuration

Page 29
Rev. : 002
HF - VISION 10 & PHOENIX
Lighting Technologies
9.5. Configuration
The HF communication system is configured to fit the most common standard PC
settings. Nevertheless, some communication settings have to be adapted to the
computer’s hardware profile. This can be done via the menu item Configuration.
9.5.1. Configuration - Communication
This configuration handles the serial communication between the SCC software and the
lighting desk.
If your lighting desk is connected to the SCC-PC’s com port 2 copy the above shown
settings, otherwise adapt the com port to COM1.