Page 27
Rev. : 002
HF - VISION 10 & PHOENIX
Lighting Technologies
1) Make sure no other programs are running. If so, close these applications and
continue the SCC Set-up program.
2) Select the destination drive and directory.
The default directory is set to c:\Program Files\Satellite Control Centre\. Of course,
you can alter the destination by clicking the Change Directory Button.
To continue installation of SCC to the specified location, click the rather large button
on the left.
3) After all files have been successfully decompressed and copied, and registry
settings were accomplished, setup is completed.
To Next Page
Loading...
