18
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Dashboard > Settings > Time
This page deals with all time related settings for the installation and allows up to three
external NTP servers to be dened.
NTP Enabled
Determines whether one or more external Network Time Protocol servers should be
used to provide timing for the installation.
Server 1 Address
Enter the IP address of the NTP server.
NTP Key Number/NTP Key
If you wish to use Symmetric key authentication for the server, enter an appropriate NTP
key number and key.
If you need to add more NTP servers, click the Set option next to the NTP Server 2 or
3 entries.
Time Zone Area and Time Zone Location
Use these entries to pinpoint the current location of the installation.
Dashboard > Settings > Active Directory
This page sets up the active directory server, if there is one on your network, and to use
active directory to maintain the user database.
AD Enabled?
Determines whether Active Directory features will be used.
Account Sufx
Enter the account sufx for your domain.
Base DN
Specify the base Distinguished Name for the top level of the directory service database
that you wish to access.
Domain Controller
Enter the IP address or name of the server that holds the required directory service.
Username, Password
Enter the username and password for the domain account.
Sync Schedule
Choose the most appropriate synchronization schedule, from hourly intervals to daily or
weekly.
Dashboard > Settings > Mail
This page sets up the email functionality of the A.I.M. server if required. An external Email
server is required to sit on the network if this functionality is to be used.
Mail Enabled?
Determines whether the mail features of A.I.M. should be invoked.
SMTP Domain name/IP
Enter the name or IP address of the external SMTP server that will be used to process
all outgoing mail.
SMTP Port
Enter the appropriate port on the SMTP server.
Username, Password
Enter the appropriate username and password for access to the SMTP server.
Email Address for Alerts
Enter the email address that will be used to send alert messages.