Additel 686 - Display Resolution Setting

20
Table 10 Pressure Settings
Item
Effective value
Description
Pressure type
Gauge pressure/Absolute pressure
Set pressure type
Display Rate
1 ～ 10
Readings per second
Stability enabled
Open/ close
Turn on stability judgment
Stability
±(0.005～1)%F.S
It can be set after turning on
stability enabled
Stability time
(1 ～ 60)S
Time to determine the stability
Tare enabled
Open/ close
Turn on the tare function
Tare value
(-999999～ 999999)
Tared value
Alarm enabled
Open/ close
Enable or disable the Alarm
function. After enabling alarm
function, the outer circle of the
screen will indicate the range of
the alarm
Alarm range
Alarm lower limit ~ Alarm upper limit
Edit the upper and lower limits
of the alarm range
2.3.6 Display Resolution
Provides pressure measurement resolution display settings, 4, 5 and 6 digits can be set.