Additel 686 - Communication Setting; Bluetooth; Wireless Communication

31
3.1 Communication Setting
3.1.1 Bluetooth
The calibrator communicates with the mobile phone App via Bluetooth.
Table 13 Bluetooth communication setting
Item
Effective value
Description
Bluetooth state
Open/close
Open or close Bluetooth function
Bluetooth name
Support letters, numbers or symbols
Set the Bluetooth name of the calibrator
Physical address
Read only
3.1.2 Wireless Communication
This setting is only provided when optional module is a WIFI module, at this time the device can be connected to the
wireless network through the WIFI module.
Table 14 Wireless communication setting
Item
Effective value
Description
WLAN
Open/close
Open or close Wi-Fi
Wireless network
Depends on the network environment
Wireless network access point selection
Advanced options
DHCP/manually
Choose how to get device address
◆The port number and physical address are factory settings and cannot be changed
1. When DHCP is selected for advanced options, the contents of the following table are automatically allocated by
the system and become read-only items;
2. When the manual mode is selected for the advanced options, the contents of the following table must be filled