The highly visible yard sign and window decals warn potential
intruders that your home is protected by an ADT security system.
You will be provided with a yard sign and window decals.
A motion detector is mounted on the wall inside your home. This
sensor can detect when there is movement within its field of view. If
the system is on when this happens, an alarm signal goes to an ADT
Customer Monitoring Center.
The siren is a small plastic box mounted inside your home. When
an alarm occurs, the siren sounds a warning designed to frighten
off intruders. The siren may also sound when you use some of the
system’s special features.
The power transformer is plugged into an outlet near the master
control panel. It provides electrical power to the system.
If you should notice that the transformer is unplugged, plug
it back in immediately.
This device connects the security system to the telephone line in
your home, making it possible for the system to send alarm signals
to ADT’s Customer Monitoring Centers. It is located near the master
control panel.
Do not remove the dialer cable from the jack unless an ADT
Representative or this manual instructs you to do so.
Motion Detector
Power Transformer
Telephone Jack
Yard Sign and
Window Decals
Siren
4
Standard Equipment, cont’d.
To Next Page
Loading...
Need help?
General
