System Options
The system has five options:
1. Bypass
2. Door chime
3. Additional keypad codes
4. Alarm memory
5. Test
A sixth option, GoTo, is only available in systems with multiple areas.
This section describes each of these options.
Bypass a Zone
When you bypass a zone, the system ignores it. Use this feature whenever you want to turn the system on, but leave
off a particular sensor. The bypass is automatically canceled when you turn the system off.
To bypass a zone:
1. Press the OPTIONS key.
2. Press the 1 key.
3. Enter the number of
the zone you wish to
bypass. The keypad
beeps. The READY
and the BYPASS lights
turn on.
1. Press the OPTIONS
key until the message
reads BYPASS, ENTER
ZONE #.
2. Enter the number of
the zone you wish to
bypass. The keypad
beeps. The win-
dow reads READY,
BYPASS. The number
of the bypassed zone
lights momentarily.
21
BYPASS
Standard Keypad Premium Keypad
To Next Page
Loading...
Need help?
General
